| The One Ring http://ww.one-ring.co.uk/ |
|
| Concerning Washes & Alcohol http://ww.one-ring.co.uk/viewtopic.php?f=100&t=25379 |
Page 1 of 1 |
| Author: | NetrixX [ Tue Feb 26, 2013 2:59 pm ] |
| Post subject: | Concerning Washes & Alcohol |
I'm wondering what people's experience and tips are for using washes & brushing main areas off with alcohol to remove excess wash. I've recently come across this technique. Basically what you do is paint a base color, varnish it, then pop your wash over it, and finally remove the excess wash with alcohol from raised areas. I for one usually paint the raised areas after washing, but this might work better, so I'm just wondering if any of you have tried this, have good/bad experience with it, and have suggestions as to what alcohol to use? (from what I understood, cheap vodka from around 40-50%) |
|
| Author: | Lord_of_the_nine [ Tue Feb 26, 2013 8:36 pm ] |
| Post subject: | Re: Concerning Washes & Alcohol |
Well well another chemistry lesson LOOOOOOOOOL. I have never used or knew anything about this technic but from what I know is that ethanol or ethyl alcohol is used in chemistry as a solvent so it must somehow reacts with the acrylic colour by diluting it and therefore removing it. In this case the purer the ethanol the better the results I don't know in UK but here (Greece) you can find very cheap (blue coloured) alcholol in the supermarkets which is about 95% pure but a cheap vodka could also get the job done just with more effort I guess. Only remember the higher the concentration the better the results. But you must be careful when you use it because you might get different results(like ruining the paint job) and of course this goes without saying: avoid eye contact with ethanol |
|
| Author: | Rangefinder [ Tue Feb 26, 2013 9:31 pm ] |
| Post subject: | Re: Concerning Washes & Alcohol |
I just blot off the excess wash with a dry paper towel. |
|
| Author: | Jobu [ Wed Feb 27, 2013 11:13 am ] |
| Post subject: | Re: Concerning Washes & Alcohol |
Another technique that helps a wash flow better is to wet the surface with water before applying the wash. |
|
| Author: | SMORG [ Wed Feb 27, 2013 3:01 pm ] |
| Post subject: | Re: Concerning Washes & Alcohol |
The only risk you run is that it's more commonly used to remove varnish and paint from models so you're likely to ruin your hard work if you don't know what you're doing |
|
| Author: | Lord_of_the_nine [ Wed Feb 27, 2013 8:06 pm ] |
| Post subject: | Re: Concerning Washes & Alcohol |
If the varnish is watered based then most likely to go with pure alcohol but if it's non water based then it will stay put |
|
| Author: | NetrixX [ Mon Mar 04, 2013 2:02 pm ] |
| Post subject: | Re: Concerning Washes & Alcohol |
Thanks for all the tips, I plan on trying this out on a few Space Marines soon. I'm thinking of using cheap vodka, but might try pure alcohol as well. |
|
| Author: | Damian [ Mon Mar 04, 2013 2:57 pm ] |
| Post subject: | Re: Concerning Washes & Alcohol |
Be careful though, if you use too much alcohol you may forget to wash. Quote: I plan on trying this out on a few Space Marines soon. I'm thinking of using cheap vodka A wise idea, their Oolitic Kindeys will protect them from the low grade booze, we can't have drunk Astartes. Fer the....Fer the....ummm, fer the wossisname, you know, The Emperororor, yer my best friend you are, I love you like a bruvva, bruvva. Giz s'more of that cheap vodka. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|