The One Ring
http://ww.one-ring.co.uk/

Reshaping Finecast
http://ww.one-ring.co.uk/viewtopic.php?f=30&t=30933		 Page 1 of 1
Author:  Baardeend [ Fri May 01, 2015 10:27 am ]
Post subject:  Reshaping Finecast
Hi guys,

While I was trying to assemble my Great Beast of Gorgoroth I noticed some parts (actually a lot of the parts) wouldn't fit together very nicely.
I once read somewhere Finecast could melt when it got to hot, so I heated it with a lighter to bent it in shape. This actually worked very vell, but there must be a better (and safer) way to do this.

How do you guys reshape Finecast?
Author:  Oldman Willow [ Fri May 01, 2015 10:33 am ]
Post subject:  Re: Reshaping Finecast
Hot water
Author:  Dead Marsh Spectre [ Fri May 01, 2015 10:39 am ]
Post subject:  Re: Reshaping Finecast
As Oldman Willow says hot water works perfectly. i wouldn't recommend heating the finecast with a lighter.
Author:  Baardeend [ Fri May 01, 2015 11:24 am ]
Post subject:  Re: Reshaping Finecast
Thanks, I will definitely try it that way next time!
I wouldn't recommend to use a lighter as well. It was sheer frustration I used one :oops:
Author:  Eol the dark elf [ Fri May 01, 2015 1:49 pm ]
Post subject:  Re: Reshaping Finecast
I found out the hard way that a hair drier will work just as well melted a sword off once :shock:
Author:  orc-archer [ Fri May 01, 2015 2:27 pm ]
Post subject:  Re: Reshaping Finecast
Hot water indeed.
Author:  Something Wicked [ Sat May 02, 2015 7:19 am ]
Post subject:  Re: Reshaping Finecast
First (and last) finecast products I got were High Elf spearmen and a couple of character models.
Every blade and spear was terribly misshapen...

I looked around online and found instructions on how to fix this.

Dip the resin in a bowl of hot water, and when the part is bendy, shape it with your fingers and dip it in a bowl of cold water to set it. I did this and repeated as needed. This solved most of the problems, but not all. I think I'll have to actually replace at least one spear and blade with a conversion, because it is truly un-fixable. Not very happy with S-bendy spear blades, and I'm never buying this product again.

But, most things can be fixed with hot water, bending, and then a dip in cold water.

Hope that helps. ;)
Author:  Oldman Willow [ Sat May 02, 2015 12:42 pm ]
Post subject:  Re: Reshaping Finecast
I am in the never buying it again school myself. I think a lot of people use heat guns and hair dryers to bend plastic. I find that air heats unevenly so it is very difficult to straighten small things like spears and swords. You can always use the oven. The heat needs to be set a few degrees below boiling point. Hot water is the best for me at least. 8)
Author:  Ukfreddybear [ Sat May 02, 2015 3:58 pm ]
Post subject:  Re: Reshaping Finecast
Baardeend wrote:
Hi guys,

While I was trying to assemble my Great Beast of Gorgoroth I noticed some parts (actually a lot of the parts) wouldn't fit together very nicely.

How do you guys reshape Finecast?

Is it the older style with two halves or the newer version with two separate legs?
Author:  Valadorn [ Sat May 02, 2015 6:52 pm ]
Post subject:  Re: Reshaping Finecast
Oldman Willow wrote:
Hot water


"Hot", not "boiling". Exactly as Oldman said.
Author:  Baardeend [ Sun May 03, 2015 7:44 am ]
Post subject:  Re: Reshaping Finecast
Thank you all for the tips! The dip in hot water sounds like an easy and safe way to reshape finecast :)


Eol the dark elf wrote:
I found out the hard way that a hair drier will work just as well melted a sword off once :shock:


Hahaha :lol: Nice to hear I'm not the only one making some odd choices :-D

ukfreddybear wrote:
Is it the older style with two halves or the newer version with two separate legs?

It's the newer version with two separate legs. The great beast itself wasn't the problem. It was the platform for the orcs. It was simply impossible to get all pieces together due to some crazy outward bends :?

Although I wouldn't recommend heating Finecast with a lighter (and watching it catch fire sometimes :oops:) I did get to reshape the parts in a way all pieces came together and I'm happy with the result :)
Author:  Ukfreddybear [ Sun May 03, 2015 10:24 am ]
Post subject:  Re: Reshaping Finecast
Ah okay. I did YouTube tutorials on how to build/fix the finecast GBoG. Here is the second video which covers the howdah

https://youtu.be/kAeRl60bNWM
Author:  Dorthonion [ Sun May 03, 2015 12:51 pm ]
Post subject:  Re: Reshaping Finecast
Has anyone tried using a flamethrower? :)
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/