This is great, can't wait for more updates.
All those minis are making me drool
| The One Ring http://ww.one-ring.co.uk/ |
|
| Celevue's LotR campaign-behind the scenes (13/1/20 Hornburg) http://ww.one-ring.co.uk/viewtopic.php?f=50&t=25227 |
Page 2 of 31 |
| Author: | Green_Dragon [ Tue Feb 12, 2013 1:52 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
Oh wow, this is unreal. I wish you the best of luck what a mighty project. Please update as regularly as possible! |
|
| Author: | Sir Richard [ Tue Feb 12, 2013 2:31 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
This is amazing! |
|
| Author: | Harfoot [ Tue Feb 12, 2013 7:20 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
More photos of the statues please. You have more stock than GW do! |
|
| Author: | ste271276 [ Tue Feb 12, 2013 7:40 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
Awesome post fella will def be keeping an eye on this |
|
| Author: | Gandalf The Grey [ Tue Feb 12, 2013 9:19 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
This is great, can't wait for more updates. All those minis are making me drool
|
|
| Author: | John Wayne [ Wed Feb 13, 2013 1:01 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
Nice scenery, nice painting  . Nice backlog but will you ever get around to painting and finishing?
|
|
| Author: | Celevue [ Wed Feb 13, 2013 9:16 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
Again, thanks for the great comments! @SidTheSloth, I guess I will be doing quite a bit of M-E over the course of the campaign. The Black Gate is optional – it will be built if the story requires it. But we have no need for a Barad-dûr. At the moment, we will also not play Hobbit, so there is no need for Goblin town or Mirkwood. @Harfoot, I assume you mean the large Argonath statues? I will grab a couple of additional photos for you soon. @John Wayne – I am patient, and our campaign has no need for rush. I will attempt to build & paint Rohan and Isengard armies during this year, aiming for serial / mass production to an acceptable quality. I will not attempt painting all the figures to anywhere near exhibition / contest quality. Spray can for dominant color, a few additional colors with brush, shading, and highlighting for the figures, and, separately, spray can for bases, dip into glue + dip into turf. Then combine figure + base, and touch up to hide the slot. Similar process as with the bases for the movement trays. |
|
| Author: | Celevue [ Wed Feb 13, 2013 9:21 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes & WIP |
Terrain building work continued yesterday with the pouring of resin water on one of the two river terrain tiles. This is the first time I worked with Woodland Scenics’ realistic water, and I was a bit nervous – the stuff apparently escapes through the tiniest of holes or cracks, and the bottom should be absolutely level, otherwise the resin will pool on the lower part of the river / lake base. Here you can see my careful attempts to combat both of these known issues – the base should be quite level, and to ensure that my masking tape dam held, I caulked it with another Woodland Scenics product, Water effects, which is otherwise intended to be used on top of the cured realistic water to produce waves. Water effects is white out of the bottle, but dries clear. I gave it about a week to cure before pouring the Realistic water.   Here goes nothing… the river bottom required one and a half bottles of Realistic water to cover. I used brush to coax the water between the reeds and all the way to the shoreline (the instructions say you should pour it to the center to avoid capillary seeping).   This is how the river looked immediately after the Realistic water had been poured – quite reflecting and still…  Alas, my method of setting the tile level using newspapers probably wasn’t enough – the weight of the Realistic water must have offset the balance. This evening I checked on the drying process, only to note that the water had, indeed, pooled to the other end of the river…  As an additional insult, the Water effects I used to secure the masking tape dam had actually turned back to white. This was an unexpected effect – I’m hoping that it will turn transparent again, but am not holding my breath. For the next water projects, I will use silicone as sealant. I had also hoped to make do with just one layer of Realistic Water, but now I need to pour more at least to the “shallow end” of the river. As you can see from the final photo, the other, “deep” end looks quite like it did the day before.  I’ll post an update in a couple of days after pouring the second layer (and propping the tile so that it has a very slight incline towards the “shallow end”). I'm also working on the foam horses of the Ford of Bruinen, but more on that later this week - along with updates about building the Hollin Gate of Moria. |
|
| Author: | Sticky Fingersss [ Thu Feb 14, 2013 8:18 am ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes (2/13 - wate |
Wow... just wow. |
|
| Author: | Crucium Giger [ Thu Feb 14, 2013 8:53 am ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes (2/13 - wate |
You seem to be having some problems with the river but to be honest it still looks pretty damned amazing 
|
|
| Author: | Celevue [ Fri Feb 15, 2013 1:59 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes (2/13 - wate |
As promised, here are two more pics of the Argonath statues. Both have a non-canon staircase + door on the side facing away from the river. These will disappear from sight once I embed the statues to hillsides in the Amon Hen / Amon Lhaw scenery piece, to be built in the future. There's a figure of Gandalf on the stair to give you a better sense of scale. The river tile, by the way, has given me a positive surprise - the Woodland Scenics water effects has turned back to transparent after giving me a scare earlier. I will soon pour another layer of Realistic Water (but only after the mailman brings me two extra bottles - I'm now down to my last half a bottle, and that might not be enough).   Meanwhile, here's a progress photo of the Ford of Bruinen foam horses. The Ebob horses are now embedded into the styrofoam wave, and the entire wave has been covered with putty. Next, I will apply acrylic gel medium overall to give the wave a water-like texture.  Finally, here's Gandalf looking at an early draft of the Moria door. I'm about to start cutting parts for the Hollin gate board, and more updates will follow soon. 
|
|
| Author: | SidTheSloth [ Fri Feb 15, 2013 2:11 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes (2/13 - wate |
You must have some serious budget! Looks great so far though!
|
|
| Author: | Crucifer [ Fri Feb 15, 2013 2:17 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes (2/13 - wate |
Wow this looks so awesome! I'm going to follow this WIP for sure =) |
|
| Author: | Celevue [ Fri Feb 15, 2013 2:57 pm ] |
| Post subject: | Re: Celevue's LotR campaign - behind the scenes (2/13 - wate |
@Sid, not a serious as I would want it to be! @Quendil, I am fortunate to have three work areas. The main hobby space is a former generic storage room, about 34 sqm or so, which will at some future date house the model railway I'm planning. But in the meanwhile, the already-built benchwork (about 20 sqm or so) serves as storage / work surface for larger terrain pieces. For figure painting and more delicate modeling, I have a small dedicated hobby room, and I do spray can painting (mostly basecoating figures) either outside (summertime) or in the garage (wintertime). |
|
| Author: | Celevue [ Sun Feb 17, 2013 10:55 pm ] |
| Post subject: | Progress on foam horses |
Hi folks, A couple of photos of the foam horses - I've coated the entire piece quite liberally with acrylic gel medium to give it a uniform texture.  Here is a close-up of the horses.  Next step: painting... |
|
| Author: | Celevue [ Sun Feb 17, 2013 11:20 pm ] |
| Post subject: | Moria gate board - work begins |
I've now started work on the Moria west gate board. It will follow the layout of the Fellowship journey book board, but will be a bit wider (i.e. my standard size of 80 x 90 cm). In addition to the Wall of Moria, the Doors of Durin and the Watcher's pool, I wanted to add the small creek to the norther edge of the pool, as described in LotR ("it was green and stagnant, thrust out like a slimy arm towards the enclosing hills"). I also wanted to add some details to the chamber immediately beyond the doors. Since this chamber is not as wide as the board, there will be some unused space in the two corners of the board. Additional design considerations arise due to my storage shelves, which allow a board of up to 17cm height. I wanted the Wall of Moria (and the holly trees) to be taller, so they must be detachable. Here is a rough plan of the board.  Based on the plan, I cut a 20cm tall, 80 cm long piece of 3cm foam to act as a backing for the Wall of Moria, and proceeded to do initial placement of various rock pieces (Noch foam rocks as well as rocks cast with Woodland Scenics molds):  I drew some designs for the chamber, following a similar pattern to the Balin's tomb board, and cut some more blue foam...  ...as well as 3mm foamboard for the trimming.  I cut two layers of 5mm foamboard around the Watcher's pool - the stepped layers were camfered, and will be later covered with putty. Befre that, however, I hot glued the rock pieces to the vertical divider as well as to the northern (left) board edge.  Then comes a fun (albeit messy) stage - I filled the gaps between the rocks with plaster cloth. When the plaster is dry, I will add some thick hydrocal and do some rock sculpting.   I also started work on the holly trees guarding the door. Since they are quite tall (and their above-ground roots are such an iconic sight), I have started with two Woodland Scenics tree armatures, and amended them with additional wire branches and roots.  The next steps will be the aforementioed rock sculpting, and smoothing the ground with putty. Plenty of smaller rocks and talus will be added next, followed by painting. The holly trees will get a coat of flexi-bark and some paint. For the couple of dead trees sticking out of the water, I will probably settle for bare WS armatures without any add-ons. I also need to finish painting the Watcher, as well as few dwarves (including Ori and Oin). But more on those in another post in the near future. Stay tuned... |
|
| Author: | Rognarr [ Sun Feb 17, 2013 11:28 pm ] |
| Post subject: | Re: Celevue's LotR campaign -behind the scenes (18/2 Moria G |
Oh my this is looking so good already.. I wanna cry.. Can i visit you in Finland to help you with this? ^^ |
|
| Author: | Ukfreddybear [ Mon Feb 18, 2013 12:21 am ] |
| Post subject: | Re: Celevue's LotR campaign -behind the scenes (18/2 Moria G |
Cool. What an awesome looking terrain thread. Top job fella! |
|
| Author: | Erurainon the Trombonist [ Mon Feb 18, 2013 1:41 am ] |
| Post subject: | Re: Celevue's LotR campaign -behind the scenes (18/2 Moria G |
My word, you're very good at this! |
|
| Author: | Sticky Fingersss [ Mon Feb 18, 2013 8:13 am ] |
| Post subject: | Re: Celevue's LotR campaign -behind the scenes (18/2 Moria G |
Blimey that looks amazing. |
|
| Page 2 of 31 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|