| The One Ring https://ww.one-ring.co.uk/ |
|
| Paint chipping off while drybrushing? https://ww.one-ring.co.uk/viewtopic.php?f=100&t=24138 |
Page 1 of 1 |
| Author: | Shieldmaiden [ Mon Oct 29, 2012 5:11 pm ] |
| Post subject: | Paint chipping off while drybrushing? |
Just lately I've found my brushes are stripping off the previous layer of paint, sometimes down to the base, as I'm drybrushing/highlighting with less paint on my brush. What's causing it? Is it the age of the brush? Is it that my brush needs a good soak in paint remover? 
|
|
| Author: | Dead Marsh Spectre [ Mon Oct 29, 2012 5:14 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
Sometimes as simple as the paint your brushing onto isn't fully dry. |
|
| Author: | Fëanor, the mighty elf [ Mon Oct 29, 2012 5:51 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
In addition to what DMS said, it could also be that the hairs of the brush are just to sturdy. Washing it could help, but it could also be good to press less hard when drybrushing. Also, when this happens the previously painted layers were probably very thin. |
|
| Author: | MacGothmog [ Mon Oct 29, 2012 6:16 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
Also, maybe grease from handling the mini or dust from filing it before aplying the primar or paint coats. |
|
| Author: | Dorthonion [ Mon Oct 29, 2012 6:32 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
I would bet on the original paint not being completely dry or cured. |
|
| Author: | Fishlegs [ Mon Oct 29, 2012 6:53 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
My first thought is how did you undercoat the model? Brushing on undercoat and not letting it dry properly can have this effect. |
|
| Author: | Shieldmaiden [ Mon Oct 29, 2012 8:12 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
Thanks for the advice chaps.  In many ways I'm still a bit of a newbie. |
|
| Author: | hithero [ Mon Oct 29, 2012 8:33 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
I didn't even know that was possible :/ After painting literally 1000's of models that's never happened. My bet is insufficient priming of the model and too thin paint not dry before dry brushing. |
|
| Author: | Dagorlad [ Mon Oct 29, 2012 10:24 pm ] |
| Post subject: | Re: Paint chipping off while drybrushing? |
Use a size 1 or 2 flat brush with soft bristles and ensure it is kept clean. When it starts to stiffen with old paint that you can't clean off, or deform through repeated use, throw it away. If you find you're still scraping away the base coat, then perhaps spray it with a matt varnish before drybrushing it. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|