All times are UTC


It is currently Fri Nov 22, 2024 6:30 pm



Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: How to paint?
PostPosted: Tue Dec 11, 2012 7:14 pm 
Wayfarer
Wayfarer
Offline

Joined: Sun Nov 25, 2012 9:53 am
Posts: 49
Hello all,

I've just recently begun getting my feet wet in the world of LOTR SBG, with my purchase of the goblin town starter set for The Hobbit. Now, i would love to paint my minis. I've already begun, and painted 3-4 minis i think (i got some starter set from games workshop with some good starting colors and a brush), and that is all well and good, but i would love some guides on how to improve. How to add shading and stuff. Washes i think they are called?

I don't by any means need to be a pro, so i don't need guides telling me every single detail on how to paint the most professional looking minis, but a guide that gives me a good starting point, isn't complicated or hard to follow, and that allows me to paint decent looking minis without spending 1000 hours.

Hope it made sense :) thank you all for helping me get into this lovely hobby!
Top
  Profile  
Reply with quote  
 Post subject: Re: How to paint?
PostPosted: Tue Dec 11, 2012 7:20 pm 
Ringwraith
Ringwraith
User avatar
Offline

Joined: Tue Dec 18, 2007 3:05 pm
Posts: 3140
Location: Canada
Images: 4
Personally I like the Citadel Painting guide GW recently came out with. It goes through all the basics in a way that would be hard to do in a post. I'm not an artist, but I find I get some pretty passable results using their techniques, which I've modified for my own taste.
Top
  Profile  
Reply with quote  
 Post subject: Re: How to paint?
PostPosted: Tue Dec 11, 2012 7:36 pm 
Loremaster
Loremaster
User avatar
Offline

Joined: Sun Jun 10, 2012 8:52 pm
Posts: 1815
Images: 10
2 things I'd recomend to get better at painting:

1.) As you said, washes. Applying a wash adds quick and easy depth to a model.

2.) Drybrushing. Drybrushing is when you get a paint that is slightly lighter than the base colour on your brush, wipe some of it off on a tissue, and then lightly brush the area you wanted to drybrush. The result should be that the raised areas of the model are lighter than the base colour. This also adds depth to the model.


I hope this helps :)

_________________
'Though my memory's fading, I remember two things very clearly: I am a great sinner and Christ is a great Savior'
-John Newton
Top
  Profile  
Reply with quote  
 Post subject: Re: How to paint?
PostPosted: Tue Dec 11, 2012 7:46 pm 
Wayfarer
Wayfarer
Offline

Joined: Fri Dec 02, 2011 10:54 am
Posts: 20
Images: 13
Hi Seerex,

I'm not a pro, far of it, but what I can tell you, is that there is a lot of experimenting with colours involved. There is no line to paint a figure. You have the basics (layering, highlighing, inking, washes, etc) and then it's up to you. I think you will find a good start in the "Tomes of Wisdom" and on the net. If you find a guideline to a particular figure on the net, then print it and safe it! I know I did and I'm greatfull for it. Because you can't find some of those guidelines anymore.
But like I said before every guideline is a start. The finisching touch is for you. It's you that holds the pencil, not your wife, girlfriend or kid(s) (ok sometimes they do and then you can start all over it :o )

If you don't find it in "tomes...", then maybe here http://www.kan.org/michael/mkp/washing.php

Anyway, I wish you good luck with the hobby.
Just watch out, its pretty addictive :-D

_________________
Painting Orcs and praying that my 10 month old stays a sleep while my 3y old is running arround ... ZEN
Top
  Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: