| The One Ring https://ww.one-ring.co.uk/ |
|
| Painting Wood https://ww.one-ring.co.uk/viewtopic.php?f=30&t=22303 |
Page 1 of 1 |
| Author: | londoncalling [ Mon Jan 30, 2012 12:05 am ] |
| Post subject: | Painting Wood |
I am looking for people's suggestions on how they paint wood. Specifically I am talking catapults/trebuchets etc. In the past I have used scorched brown, brown wash then highlight, but it doesn't feel right. I'm guessing it should be more greyish ? What sort of wood would be cut for siege equipment, if freshly cut what colour is it, if they are older machines would the weathered wood be a different colour. Plain dark brown - hmm Grateful for any advice !! |
|
| Author: | tomogui [ Mon Jan 30, 2012 5:41 am ] |
| Post subject: | Re: Painting Wood |
Yes, weathered wood is silvery-greyish, and fresh-cut lumber is more yellow-brown or red-brown, depending on the type of wood. To get a good weather-exposed look, start with a lighter base brown colour. You can also put a tiny bit of blue in your base brown to deaden the colour, highlight it up as normal, and do a final light drybrush of bleached bone over it (assuming there is some sculpted wood grain that the drybrushing will pick up). For fresh-cut wood, the "cut" edges of the timber should be a different colour from the rest of the timber, probably more vibrantly coloured. Over time, this disappears and old wood tends to weather into a uniform colour. Also, the metal fixings should match: for weathered wood, the metal should be pitted, rusted, with a patina of use. This will help create the illusion! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|