| The One Ring https://ww.one-ring.co.uk/ |
|
| helmet https://ww.one-ring.co.uk/viewtopic.php?f=39&t=23868 |
Page 1 of 2 |
| Author: | garmenhord [ Mon Sep 24, 2012 7:27 pm ] |
| Post subject: | helmet |
It's still a work in progress but here is what i have got so far.   I hope to improve it by adding a layer of clay all around it. With more dettails and decoration. Then i will spray can the whole thing. Just hoping the clay might not chip off or break.. I ll do a test with the clay tomorrow. |
|
| Author: | Thecow [ Mon Sep 24, 2012 11:17 pm ] |
| Post subject: | Re: helmet |
Nice helmet! |
|
| Author: | Callan [ Tue Sep 25, 2012 12:51 am ] |
| Post subject: | Re: helmet |
Good start so far. You may have thought about this already, but I will mention it anyway. I donot know how much clay you will be adding and what type of clay. In general, clay will add weight and will shrink a little when dried. It may even crack when dried if too thin. Check out modeling paste. I look forward to seeing your progress whichever you decide to use. Have fun being creative Garmenhord. 
|
|
| Author: | garmenhord [ Tue Sep 25, 2012 7:25 am ] |
| Post subject: | Re: helmet |
added a first layer of clay over a part of the helmet, since it's getting colder and stuff - the clay hasn't dryd out completly and still feels a bit wet. It's looking good so far - no cracks yet and it's not crumbling off. I will continue as soon as the first layer is dryd out more. I want it to be solid first, it stil leaves marks if u touch it. Should be dryd up tomorrow for sure.Still got 2kg of clay left so i guess i should have enough to do the whole thing. Using do and dry from Creall - quite cheap 4 euro for 1 Kg. I don't mind adding weight - caus that will make it feel like a real helmet.  Wondering if i could add something on top of the clay when it's done like varnish or something to make it even sturdier to prevent cracks.. |
|
| Author: | Dorthonion [ Tue Sep 25, 2012 7:57 am ] |
| Post subject: | Re: helmet |
Is this part of a Halloween costume? Pardon me for the silly question. |
|
| Author: | SidTheSloth [ Tue Sep 25, 2012 8:01 am ] |
| Post subject: | Re: helmet |
i dont really know anything about making helmets but that looks like a very nice design 
|
|
| Author: | garmenhord [ Tue Sep 25, 2012 8:03 am ] |
| Post subject: | Re: helmet |
Making it caus i felt like making one, 
|
|
| Author: | Dorthonion [ Tue Sep 25, 2012 8:07 am ] |
| Post subject: | Re: helmet |
Good for you. Are you going to paint it kind of rusty/dirty in the true goblin style? *** Note to all One-Ringers - sometimes I work from a laptop and my spelling ability goes a bit AWOL due to inadvertant contact with the touchpad. And being distracted by a 14 week old pup who is currently snoring like Godzillas big brother. *** |
|
| Author: | garmenhord [ Tue Sep 25, 2012 8:11 am ] |
| Post subject: | Re: helmet |
ye - got myself a can of silver and i will use some washes with acrylic paint to tune it up - but i need to add the clay layers first - and i might add some more detaills with the clay , so it will be a while b4 i get to that stage. |
|
| Author: | garmenhord [ Tue Sep 25, 2012 9:42 am ] |
| Post subject: | Re: helmet |
 covered in clay - it already took a little tumble of my desk - few cracks in it but it's still quite ok - i ll enstrenghten those parts with more clay. |
|
| Author: | garmenhord [ Tue Sep 25, 2012 2:04 pm ] |
| Post subject: | Re: helmet |
 made myself a battle axe - still need to paint it tough. Lol this is really looking crapy - might end up with the garbage - but at least i had my fun making it
|
|
| Author: | SidTheSloth [ Tue Sep 25, 2012 2:09 pm ] |
| Post subject: | Re: helmet |
is that a picture of you on holiday? 
|
|
| Author: | garmenhord [ Tue Sep 25, 2012 2:12 pm ] |
| Post subject: | Re: helmet |
ye i tend catch fishes with an axe in the lava pools 
|
|
| Author: | John Wayne [ Tue Sep 25, 2012 8:07 pm ] |
| Post subject: | Re: helmet |
Looks like you are having fun on holidays. Tip for more Orcish look. Strip off and wear a loin cloth or something to make it not pornographic in any way. Lol best thing i have seen on this forum. So funny! |
|
| Author: | garmenhord [ Sun Oct 07, 2012 4:46 pm ] |
| Post subject: | Re: helmet |
Moved along quite nicely with adding clay on the helmet. It's almost fully covered. The fase after that will be adding detaills.  I must say it's quite sturdy. Sometimes there are some cracks in the clay - but smearing a thing layer of clay in the crack is enough to fix it. I think it will be quite fine. I am going to try to finish it up in 2 weeks for the comic-con. Don't know if i get there in that time. |
|
| Author: | garmenhord [ Mon Oct 08, 2012 7:39 am ] |
| Post subject: | Re: helmet |
Cracks do appear apperently so i think i am finish this guy up. But i do was thinking of using a coat of glue all over the mask.. does anyone know if that might help to make it a bit more crack-resistant? More details appeared - now i only got the do the wing thingie on the other side  It's a bit simpler then my first design  I wonder if it will look better painted.. This is the axe i did - but that one was covered in tape. 
|
|
| Author: | garmenhord [ Wed Oct 10, 2012 10:14 am ] |
| Post subject: | Re: helmet |
Started painting:  the silver paint is making it very hard for the black paint to attach. Of course the flash makes it look lighter. |
|
| Author: | Erurainon the Trombonist [ Wed Oct 10, 2012 10:45 pm ] |
| Post subject: | Re: helmet |
Looking good garmenhord!
|
|
| Author: | Sticky Fingersss [ Thu Oct 11, 2012 9:08 am ] |
| Post subject: | Re: helmet |
Looks great! Is that the same helmet that Frodo wore in disguise? |
|
| Author: | garmenhord [ Thu Oct 11, 2012 9:13 am ] |
| Post subject: | Re: helmet |
Ty, and no it's not the same helmet. http://bulk.destructoid.com/ul/27324-header.jpg it might look a bit like it from afar. 
|
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
