The One Ring https://ww.one-ring.co.uk/ |
|
lotrscenerybuilder's Door of Durin https://ww.one-ring.co.uk/viewtopic.php?f=7&t=19623 |
Page 1 of 1 |
Author: | thewhitehand [ Wed Oct 20, 2010 9:17 pm ] |
Post subject: | lotrscenerybuilder's Door of Durin |
Hi all It's been a while since i've posted on this site. Unfortunately i've been pretty busy. Now I have quite a bit of spare time, I want to get more into recreating Tolkien's world, the way Peter Jackson and Weta did. I've been looking at the movies and especially lotrscenerybuilder's site, and I have been amazed at the construction. I have an urge to build a Moria set, from the Door of Durin to the Bridge of Khazad-Dum, and then shoot some pictures of my Fellowship moving through the mines, fighting goblins and even the dreaded Balrog of Morgoth. I have decided to start with the Door of Durin/the Watcher in the Water. I am taking the design from lotrscenerybuilder's model, as I think their models are absolutely astounding! The board will be 45cm X 45cm, and from looking at the pictures, I have made out my own plans. They only things I really need help on are The Watcher in the Water (what size it is etc.), what size the Sabertooth Hexes it is designed on are, and roughly where abouts the hexes are placed in the water. I would greatly appreciate any help on this, and obviously lotrscenerybuilder would be the best to help Thanks, and here is the link http://www.lotrscenerybuilder.org/watcher.php And here is another one http://www.lotrscenerybuilder.org/gaming_middle_earth.php |
Author: | Gandlaf the Grey [ Thu Oct 21, 2010 7:04 am ] |
Post subject: | Re: lotrscenerybuilder's Door of Durin |
Sounds a great idea and will be interesting to watch it develop. I take it you will be adding a Balins Tomb to your plans ? |
Author: | thewhitehand [ Thu Oct 21, 2010 3:12 pm ] |
Post subject: | Re: lotrscenerybuilder's Door of Durin |
yes, the main sets I want to construct are the Door of Durin, The Chamber of Mazarbul (Balin's Tomb), Durin's Causeway and the Bridge of Kazad-Dum. If, after that I still want to build more of Moria, then I'll probably do the stairway inside durin's door, and part of the great hall. |
Author: | Ranger of Gondor [ Thu Oct 21, 2010 3:25 pm ] |
Post subject: | Re: lotrscenerybuilder's Door of Durin |
I remember ukfreddybear sculpted a watcher in the water... maybe if you send him an e-mail or PM he could give you some pointers (: Good luck |
Author: | thewhitehand [ Fri Oct 22, 2010 4:54 pm ] |
Post subject: | Re: lotrscenerybuilder's Door of Durin |
Thanks I think i'm going to make each side of the hexes 2.5cm. Would that be about right? |
Author: | thewhitehand [ Fri Oct 22, 2010 4:56 pm ] |
Post subject: | Re: lotrscenerybuilder's Door of Durin |
Also in terms of paint, how would I paint the water? And what about the watcher? I'll probably be getting the tester pots from B&Q if anyone knows them. If not then just a general shade would help Thanks |
Author: | Ranger of Gondor [ Sat Oct 23, 2010 11:32 am ] |
Post subject: | Re: lotrscenerybuilder's Door of Durin |
Use scenic water! Here's a good article on Terragenesis that could help: http://www.terragenesis.co.uk/infopages/page374.html As for the shade I would say it's probably similar to water found in caves... that is a mix of grey and sand with a little hint of green. (: |
Author: | thewhitehand [ Sat Oct 23, 2010 7:31 pm ] |
Post subject: | Re: lotrscenerybuilder's Door of Durin |
thanks for that but I think I'll just paint the water, as I think it will work better, because when i'm fighting a battle on the board, the models will have to move onto the water to chop off those dirty great tentacles and save Frodo from the big slimy beastie |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |