Hobbit and Ranger....Oh, wait I already have that army.
And I agree, metal sculpts are far superior to plastics.
| The One Ring https://ww.one-ring.co.uk/ |
|
| All metal armies? https://ww.one-ring.co.uk/viewtopic.php?f=88&t=16571 |
Page 1 of 2 |
| Author: | Time of Madness [ Sat Nov 07, 2009 2:18 am ] |
| Post subject: | All metal armies? |
If money wasn't an issue and you had a chance to put together an all metal (or majority metal) WOTR army what one would you choose and why? I find the metal sculpts to be far superior in detail over the plastics. But I find it tough to answer this question as there would be a lot of neat armies possible. Time of Madness |
|
| Author: | lordgoober [ Sat Nov 07, 2009 4:54 am ] |
| Post subject: | |
I would do a fiefdoms based Gondor list. In the two types of Swan Knights (mounted and foot) you a much higher chance of supercharges. In the M@A of Dol Amroth and Axemen of Lossanach you have the only Gondor + Arnor formations with Pikes and in the Clansmen of Lanedon you have a nasty formation of 2hw warriors. Then you can use metal rangers for some some ranged punch. |
|
| Author: | BilboOfTheWhiteTower [ Sat Nov 07, 2009 5:33 pm ] |
| Post subject: | |
Hobbit and Ranger....Oh, wait I already have that army.
And I agree, metal sculpts are far superior to plastics. |
|
| Author: | Captain Ingold [ Sat Nov 07, 2009 5:48 pm ] |
| Post subject: | |
BilboOfTheWhiteTower wrote: metal sculpts are far superior to plastics.
That's because Metal minis are done on "Heroic scale", ie. they are on 28mm scale compared to the normal 25mm.... as for the original question, it's tough. I guess I second a Fiefdoms army for the afore-mentioned reasons. 
|
|
| Author: | jebbo [ Sat Nov 07, 2009 7:53 pm ] |
| Post subject: | all metal army |
I would love a metal WOTR fiefdom army but the way my SBG force is going i may end up with an all metal army anyway. 
|
|
| Author: | Corsair [ Sat Nov 07, 2009 9:58 pm ] |
| Post subject: | |
Maybe an elite rohan regiment of Royal Guard. Perhaps the complete formation of shagrats tower guard would be nice. Dunlendings might also be nice..and that might be answered in the next rohan release
James |
|
| Author: | rohan nut [ Wed Nov 11, 2009 8:26 pm ] |
| Post subject: | |
um either Arnor or Fiefdoms Arnor are super but they cost heaps down here. and the fiefdoms are super with all the unique optionsfor Gondor and the best cavalry for Gondor |
|
| Author: | Gorb@g [ Wed Nov 11, 2009 9:27 pm ] |
| Post subject: | |
You are very kind to ask. I would make a galadhrim force using the metals with Haldir to lead with some ents and stuff. I HATE the new plastic glads, they`re abominations! Erm, that`s my opinion anyways. No guards of what-not (the new ones with capes) and ESPECIALLY no mounted galads. 
|
|
| Author: | highkingofelves [ Wed Nov 11, 2009 9:36 pm ] |
| Post subject: | |
Certainly the Dunlending Huscarls, I love these models, so incredibly saxon. Now we just need some dunlendish pikes and cavalry models... |
|
| Author: | Phalnax [ Thu Nov 12, 2009 7:46 am ] |
| Post subject: | |
I'm going to have to go with an ENTIRE Dol Amroth army - Men at Arms, WoDA, KoDA and of course Prince Imrahil. |
|
| Author: | Gorgoroth [ Thu Nov 12, 2009 9:41 am ] |
| Post subject: | |
I would also have to go with some Dol Amroth Knights, they are just too awesome to not have
|
|
| Author: | Anduril Blade of Kings [ Thu Nov 12, 2009 2:16 pm ] |
| Post subject: | |
I play very little, but..... I think that an army of Clansmen of Lamedon would be awesome. Just imagine, ranks upon ranks of people in tartans and kilts swinging broadswords (Or are they claymores?) five feet long.... .
Or 3/4", as the case may be.... 
|
|
| Author: | King Elessar the Uniter [ Thu Nov 12, 2009 6:56 pm ] |
| Post subject: | |
Arnor would be awesome but I think I'd have to go for a Fiefdorm army. Made up of purely Axemen and Clansmen + Forlong and Angbor...*sigh* |
|
| Author: | TheBossman40k [ Fri Mar 28, 2014 3:11 am ] |
| Post subject: | Re: All metal armies? |
Why does everyone seem to prefer the LOTR metal sculpts over the plastics? Is it because about a decade ago when most of the plastics came out the plastic tech was trash back then? I find EVERY material has its awesome parts and some worse parts, which aren't much of a hindrance. But I'm guessing with the older tech of the LOTR plastics there is a actual hindrance in sculpt quality? IMO the new Hobbit plastics are great. |
|
| Author: | Knife in the Dark [ Fri Mar 28, 2014 3:39 am ] |
| Post subject: | Re: All metal armies? |
Well there are lots of reasons. The old plastics didn't have the best detail like you said. The metals seemed to be better. Also the metal models aren't as fragile as fine cast or plastics and if there was a little bend it was easier to put back into place. Just some reasons I'm thinking of right now. Although the plastics now are much better then they used to be in detail. |
|
| Author: | aelfwine [ Sun Mar 30, 2014 10:06 pm ] |
| Post subject: | Re: All metal armies? |
The new plastics are...well, alright. They are far better than the original range of plastics. They are also, irritatingly, scarcely compatible in terms of scale. One of the benefits of WOTR was that scale mattered less. Mixing and matching Hobbit range figures with old LOTR Rohirrim, for example, at a skirmish scale is a bit obviously an issue. The metals, on the other hand, have heft, higher detail, and last longer. I strongly suspect most people's finecast will be looking a bit duff in a few years. By contrast, I can strip a twenty five year old Prince August metal miniature and paint it good as new. I actually had two or three all metal 1000pt WOTR armies before the theft - Rivendell, Mordor and Angmar. Ouch. |
|
| Author: | TheBossman40k [ Tue Apr 01, 2014 11:56 am ] |
| Post subject: | Re: All metal armies? |
aelfwine wrote: The new plastics are...well, alright. They are far better than the original range of plastics. They are also, irritatingly, scarcely compatible in terms of scale. One of the benefits of WOTR was that scale mattered less. Mixing and matching Hobbit range figures with old LOTR Rohirrim, for example, at a skirmish scale is a bit obviously an issue. The metals, on the other hand, have heft, higher detail, and last longer. I strongly suspect most people's finecast will be looking a bit duff in a few years. By contrast, I can strip a twenty five year old Prince August metal miniature and paint it good as new. I actually had two or three all metal 1000pt WOTR armies before the theft - Rivendell, Mordor and Angmar. Ouch. Don't join the bandwagon and diss Finecast please. I've seen enough of that for 3 lifetimes. ALL materials have their ups and downs though yes, admittedly, metal stripping being one of its ups. Finecast has astonishing detail and I once read a blog I totally agree with, it said that the larger the model, the less prominent the flaws of Finecast became and the more prominent the pros. I <3 my GUO model. And I don't actually have any old LOTR plastics, save for 20 Uruk Hai. Its either metal Fiefdoms and Dwarves, Uruk characters (old) or plastic Goblins, Elves, Thorin's Company (new). Elves are tall I guess and the rest are short anyways, to me there is hardly difference worthy of thought, I've met 40kers who like using the old stumpy Terminators, but I don't see anyone complaining abouy them on the battlefield... |
|
| Author: | LordoftheBrownRing [ Tue Apr 15, 2014 4:19 am ] |
| Post subject: | Re: All metal armies? |
If I could make one all metal army, to go back to the original topic, boys, Id probably do Mordor because they have so many cool looking metals available. A ton of those random orcs, trolls, fell beasts....so cool. A lot of the metals have some ok poses but mordor has a large metal variety. Also my 750 pt Isengard is close to all metal. -8 uruk with shields arent but they never were made metal -Mauhur I had to buy finecast. It already broke twice using it very sparingly.... -6 scouts are plastic Other than that all ferals, crossbows, heros, and raiders are metal. I theortically could make an all metal Isengard. Actually, Im close to an all metal Dwarf army too with Balin Dain murin drar vault wardens, iron guard, khazads and such. |
|
| Author: | daersalon [ Wed Apr 23, 2014 4:33 pm ] |
| Post subject: | Re: All metal armies? |
Moria / Misty Mountains. For WotR one needs acres of gobbos for a decent sized army. An i would really love a fast array of these in metal. i have even been (slowly) working towards this with about 4-5 co of archers in metal, and a similar number with shields. (oddly spearmen are rather rare..) The metals just have a nicer variety than the plastics. But please note the goblin plastics despite being old old in GW terms for LotR, they are rather detailed. In fact almost too detailed when you have several dozen to paint and want to bulk paint em all... In this case its not quality that makes me want these in metal, just the extra variety, the clear difference to the almost ubiquitous plastic models, and the joy of their 'weight' when pushing them around in their trays on the battlefield. Back them up with black shields and the metal cave drake ... and it is awesome. Though I do have the GW Spider Queen... it looks a little naff in my opinion.. flat and uninspired, so I instead use a Heresy Giant Spider on a resin base... looks really creepy as spiders should. |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|